Darryl Keil Last Activity 2019-08-16 1:39 PM
1 replies, 142 viewings

 
back
Navigate threads:
< Previous Thread :: Next Thread >
 
^ Top
Shaun

Posts: 1

Joined: 2019-08-14

User Profile
 
Subject : Fliptop Table Press has a bad air leak. HELP
Posted : 2019-08-15 9:50 AM
Post #37847

I have been messing around with my Fliptop Table press for awhile now and have had no luck in stopping the air leaks. My blue vacuum cycles on every 5-10 seconds. I put my ear all around the table and have only noticed a few whistles coming from either corner or sides. I then apply clamps to those areas, the whistle then stops but air is still escaping at the same rate.

I have replaced the black rubber gasket, tested the vacuum by itself and had no leak.

When I first had the press it worked well, I later moved shops and between that time the press stayed outside all year protected by a tarp. I had to replace the gasket because it was falling off. What else must be replaced? looking for any ideas and help. thanks


 
^ Top
Darryl Keil

Posts: 1378

Joined: 2003-05-22
Location: Maine

User Profile
 
Subject : RE: Fliptop Table Press has a bad air leak. HELP
Posted : 2019-08-16 1:39 PM
Post #37848 - In reply to #37847

Rather than trying to figure this out over the forum I think a phone conversation would be more productive. You can call me at 207-725-0935. Darryl


back
Navigate threads:
< Previous Thread :: Next Thread >

Legend      Notification  
Administrator
Forum Moderator
Registered User
Unregistered User
Toggle e-mail notification


Logo by MAZY
Running MegaBBS ASP Forum Software v1.5.14b public beta