Darryl Keil Last Activity 2025-09-09 11:09 AM
8 replies, 2710 viewings

 
back
Navigate threads:
< Previous Thread :: Next Thread >
 
^ Top
Don Stephan

Posts: 825

Joined: 2003-07-18
Location: Cincinnati, Ohio

User Profile
 
Subject : Why Packing Tape?
Posted : 2012-02-12 4:07 PM
Post #36568

For more than a year I've been wondering why packing tape is so widely recommended to register and hold together what we are putting in the vacuum bag. I admit it does work well if sometimes hard to remove.

Seems like blue masking tape would be an alternative, but I'm not so interested as to experiment. Perhaps masking tape tears more easily. I used to think it might be thicker but now I'm not sure. Curious in Cincy.


 
^ Top
craig tufankjian

Posts: 308

Joined: 2004-02-01
Location: syracuse ny 13208

User Profile
 
Subject : RE: Why Packing Tape?
Posted : 2012-02-12 6:03 PM
Post #36569 - In reply to #36568

Call me crazy... but if I have to secure veneer prior to going into the bag as to avoid it slipping around or I have to register it to a specific line I staple it in place. No... not a pneumatic stapler, hand operated. I staple the veneer in the area that will be trimmed.

I don't use water or sanders, scrapers ect... to remove veneer tape either. the answer to that can be found at your local Gap store.


 
^ Top
ckurak

Posts: 107

Joined: 2006-10-28
Location: Florida

User Profile
 
Subject : RE: Why Packing Tape?
Posted : 2012-02-13 3:42 PM
Post #36571 - In reply to #36569

So, I am not the only one who uses a hand stapler. I have an old standard office stapler that works well. It sometimes does take a sharp blow to the stapler if the substrate is dense. But it works well. I guess I could try a T-50 stapler instead, but that's at the other end of the shop.

And I thought I was unique.




 
^ Top
craig tufankjian

Posts: 308

Joined: 2004-02-01
Location: syracuse ny 13208

User Profile
 
Subject : RE: Why Packing Tape?
Posted : 2012-02-14 5:37 AM
Post #36572 - In reply to #36571

Try an Arrow 5700 (power shot), and if you have to get tough with a piece of particle board try an Arrow 8150 electric.


 
^ Top
Earl

Posts: 75

Joined: 2003-12-04
Location: Pensacola FL

User Profile
 
Subject : RE: Why Packing Tape?
Posted : 2012-02-14 7:34 AM
Post #36573 - In reply to #36569

Craig, if you don't use water, sanding or scraping to remove the veneer tape how the heck do you do it then? Oh, and I don't go to the Gap!

As to securing the veneer, I don't normally need to but when it's critical, I use blue tape.


 
^ Top
craig tufankjian

Posts: 308

Joined: 2004-02-01
Location: syracuse ny 13208

User Profile
 
Subject : RE: Why Packing Tape?
Posted : 2012-02-14 10:24 AM
Post #36574 - In reply to #36573

I was in a GAP store years ago looking for one of my favorite over sized blue oxford shirts, next to me was a GAP employee rambling on about how rude customers are. "why do people have to take the stickers of of the clothes and stick them all over the store, if they knew how hard it was to get those off they wouldn't do it, now i gotta go get the machine and take sticker off the wall, floor dressing rooms all day long.

All I heard was "machine", kinda tuned out everything else. So I lingered around to see what machine she was talking about. she went over to the pants section and came back with some strange looking thing, plugged it in flipped the switch. asked what it was , 'OH this? it a clothes steamer, when the clothes get wrinkled we put them on hangers and steam the wrinkles out, it also works great for removing the stupid stickers, if you try to pull them off they just rip , but if you hit them with the steamer they slip right off.

The the little voice kicked in, "what are the odds? what are the odds of that gizmo removing veneer tape in one piece?

Never did get that blue shirt, I did get a fabric steamer from William Sonoma though. Worked like a charm.

you have to pay attention when your doing that procedure with PVA glue, you cant "camp out" with the steamer head, once the tape is loosened keep moving. Steam has no affect with urea.

I guess you can learn a lot from a miserable 18 year old working at the GAP.


 
^ Top
Earl

Posts: 75

Joined: 2003-12-04
Location: Pensacola FL

User Profile
 
Subject : RE: Why Packing Tape?
Posted : 2012-02-14 3:28 PM
Post #36575 - In reply to #36574

Ah,so you do use water just in a different form!


 
^ Top
craig tufankjian

Posts: 308

Joined: 2004-02-01
Location: syracuse ny 13208

User Profile
 
Subject : RE: Why Packing Tape?
Posted : 2012-02-14 5:11 PM
Post #36576 - In reply to #36575

If you wanna, you know, be technical. Kinda like saying I can walk across water, but neglecting to add, the lake was frozen.


 
^ Top
Don Stephan

Posts: 825

Joined: 2003-07-18
Location: Cincinnati, Ohio

User Profile
 
Subject : RE: Why Packing Tape?
Posted : 2012-02-14 8:09 PM
Post #36578 - In reply to #36576

LOL


back
Navigate threads:
< Previous Thread :: Next Thread >

Legend      Notification  
Administrator
Forum Moderator
Registered User
Unregistered User
Toggle e-mail notification


Logo by MAZY
Running MegaBBS ASP Forum Software v1.5.14b public beta