Darryl Keil Last Activity 2026-01-12 8:29 AM
4 replies, 2040 viewings
 
back
Navigate threads:
< Previous Thread :: Next Thread >
 
^ Top
David Fisk

 
Subject : Laminating polycarbonate(lexan) to Luan
Posted : 2000-08-14 11:39 PM
Post #30697
Will your glues work with this type of plastic? In some literature from 3m it indicates that polycarbonate is a high energy plastic. High energy materials are supose to be easier to bond to than low energy. I have a moisture cure adhesive sample that is on its way here. Them manufacture claims it will hold polycarbonate down very well. That same company suggested that I use a vacuum press for clamping. I'm going to be gluing down images from a inkjet printer and I am also concerned about the ink boiling off the polycarbonate and causing delamination. Thanks in advance for any help in this mater.



 
^ Top
Darryl Keil

 
Subject : Laminating polycarbonate(lexan) to Luan
Posted : 2000-08-16 8:32 PM
Post #30703 - In reply to #30697
Dear David,Try Polyurethane glues, like the "Gorrila glue". I find they stick well to most all plastics I have tried. A good scuff sanding will always help. Our Unibond 800 would not work on your material.SincerelyDarryl Keil: Will your glues work with this type of plastic? In some literature : from 3m it indicates that polycarbonate is a high energy plastic. : High energy materials are supose to be easier to bond to than low : energy. I have a moisture cure adhesive sample that is on its way : here. Them manufacture claims it will hold polycarbonate down very : well. That same company suggested that I use a vacuum press for : clamping. I'm going to be gluing down images from a inkjet printer : and I am also concerned about the ink boiling off the polycarbonate : and causing delamination. Thanks in advance for any help in this : mater.




 
^ Top
ismaeel akhlite

 
Subject : Laminating polycarbonate(lexan) to Luan
Posted : 2001-01-16 8:14 AM
Post #29996 - In reply to #30703
dear sir: Iam a MSC. student, in AL al-bayt University,Department of physics,Jordan.Myresearch about "lexan polycarbonate"..I needany information for that,espesialy about that , and anysearch about that ".how can i get this lexan. I hope to help me please,Thank you very much for that. yours, Ismaeel Akhlite I.Akhlite My adrees: AL-albayt Univ. Dept. of space physics P.O.Box 130195 Mafraq - Jordan e-mail: ismaeel_2000@yahoo.com




 
^ Top
ismaeel akhlite

 
Subject : Laminating polycarbonate(lexan) to Luan
Posted : 2001-01-16 8:17 AM
Post #29997 - In reply to #29996
: dear sir:: Iam a MSC. student, in AL al-bayt: University,Department of physics,Jordan.My: research about "lexan polycarbonate"..I need: any information for that,espesialy about that , and any: search about that ".how can i get this lexan.: I hope to help me please,Thank you very much for: that.: yours,: Ismaeel Akhlite : I.Akhlite: My adrees:: AL-albayt Univ.: Dept. of physics: P.O.Box 130195: Mafraq - Jordan: e-mail: ismaeel_2000@yahoo.com




 
^ Top
ismaeel abdulla a...

 
Subject : Laminating polycarbonate(lexan) to Luan
Posted : 2001-01-03 2:28 AM
Post #29964 - In reply to #30703
: Dear David,: Try Polyurethane glues, like the "Gorrila glue". I find they stick well to most all plastics I have tried. A good scuff sanding will always help. Our Unibond 800 would not work on your material.: Sincerely: Darryl Keil: : Will your glues work with this type of plastic? In some literature : : from 3m it indicates that polycarbonate is a high energy plastic. : : High energy materials are supose to be easier to bond to than low : : energy. I have a moisture cure adhesive sample that is on its way : : here. Them manufacture claims it will hold polycarbonate down very : : well. That same company suggested that I use a vacuum press for : : clamping. I'm going to be gluing down images from a inkjet printer : : and I am also concerned about the ink boiling off the polycarbonate : : and causing delamination. Thanks in advance for any help in this : : mater.




back
Navigate threads:
< Previous Thread :: Next Thread >
Legend      Notification  
Administrator
Forum Moderator
Registered User
Unregistered User
 Toggle e-mail notification


Logo by MAZY
Running MegaBBS ASP Forum Software v1.5.14b public beta