Darryl Keil Last Activity 2025-05-12 11:03 AM
3 replies, 1807 viewings
 
back
Navigate threads:
< Previous Thread :: Next Thread >
 
^ Top
RCB

 
Subject : Switch for vac press
Posted : 2006-05-24 10:56 AM
Post #33069
Hi, Neighbors,

I do not have a vac switch in my vacuum pump, and in the past I've used an on/off plug in appliance timer. I'm about to have to replace that timer, and here is what I wish I could find...

Have any of you ever heard of a timer that would give you intervals? In other words, this could be set to "on" for three minutes, then "off" for twenty minutes, etc. This as opposed to regular timers that give you "on" at 1:25 P.M. and off at 1:30. I thank you for any advice that you might have. Now let's go press some veneer!!


 
^ Top
Darryl Keil

Posts: 1454

Joined: 2003-05-22
Location: Maine

User Profile 
Subject : RE: Switch for vac press
Posted : 2006-05-25 12:46 PM
Post #33072 - In reply to #33069
RCB,

I'm not real knowledgeable on timers but check out McMaster Carr at www.mcmastercarr.com they might have something you're looking for.

Sincerely
Darryl Keil


 
^ Top
russ g

 
Subject : RE: Switch for vac press
Posted : 2006-06-23 4:07 PM
Post #33147 - In reply to #33069
intermatic dt11 will work perfectly for this.


 
^ Top
russ g

 
Subject : RE: Switch for vac press
Posted : 2006-06-23 4:13 PM
Post #33148 - In reply to #33069
Hi:
I have used an intermatic dt11 as you described and it will cost under $15
Attached file : timer 001.jpg (31KB - 359 downloads)
Attached file : timer 004.jpg (33KB - 325 downloads)
back
Navigate threads:
< Previous Thread :: Next Thread >
Legend      Notification  
Administrator
Forum Moderator
Registered User
Unregistered User
 Toggle e-mail notification


Logo by MAZY
Running MegaBBS ASP Forum Software v1.5.14b public beta