Darryl Keil Last Activity 2024-10-10 3:42 PM
3 replies, 3853 viewings
 
back
Navigate threads:
< Previous Thread :: Next Thread >
 
^ Top
Steve Stover

 
Subject : Compact 100
Posted : 2002-10-05 6:38 PM
Post #29459
Hello to Darryl and this Forum.I retired recently and finally have my shop set up to do veneering.Where do I purchase the Compact 100 and the Unibond glue? Thanks, Steve.



 
^ Top
Darryl Keil

 
Subject : Compact 100
Posted : 2002-10-06 9:47 PM
Post #29460 - In reply to #29459
Steve,Just call Vacuum Pressing Systems at 207-725-0935. Hope you enjoy veneering, it opens up a world of possibilities in my opinion.SincerelyDarryl Keil: Hello to Darryl and this Forum.I retired recently and finally have my : shop set up to do veneering.Where do I purchase the Compact 100 and : the Unibond glue? Thanks, Steve.




 
^ Top
Steve Stover

Posts: 1

Joined: 2018-04-04

User Profile 
Subject : RE: Compact 100
Posted : 2018-04-05 4:11 PM
Post #37719 - In reply to #29460
Hello Darryl. I have been away from this forum and veneering for a some years. My C100, when I try to start it is hit and miss. Sometimes it starts up, sometimes the vanes turn very slowly and I can't get them going fully. Any Ideas? Thanks,Steve.


 
^ Top
Darryl Keil

Posts: 1453

Joined: 2003-05-22
Location: Maine

User Profile 
Subject : RE: Compact 100
Posted : 2018-04-05 7:25 PM
Post #37720 - In reply to #37719
A C100 doesnt have any vanes, only reeds. Try taking off the head and cleaning the reeds. Blow things out with compressed air, but not too hard or you might damage the reeds.
back
Navigate threads:
< Previous Thread :: Next Thread >
Legend      Notification  
Administrator
Forum Moderator
Registered User
Unregistered User
 Toggle e-mail notification


Logo by MAZY
Running MegaBBS ASP Forum Software v1.5.14b public beta