Darryl Keil Last Activity 2025-09-09 11:09 AM
2 replies, 1258 viewings
 
back
Navigate threads:
< Previous Thread :: Next Thread >
 
^ Top
Dave Carter

Posts: 15

Joined: 2012-01-25
Location: Hendersonville, NC

User Profile 
Subject : Unibond 800/epoxy bond
Posted : 2012-02-18 9:31 AM
Post #36581
I need to fill in several hollow spots on a contoured wood project before vacuum veneering with Unibond 800 glue. The largest spot may be 1" by 3" by 0.125"deep. After filling with epoxy, I would let cure well and then sand the surface flush with 60-80 grit. The spots will not have any significant structural stress to speak of.

My question is: Has anyone had experience with this type of bond (Unibond 800 to epoxy) over 5+years? In my search and reading on this forum, one possibility I found might be "Durhams Rock Hard"? But, I have never used it. Or, is there a better material to fill with?

Thanks,
Dave


 
^ Top
Darryl Keil

Posts: 1455

Joined: 2003-05-22
Location: Maine

User Profile 
Subject : RE: Unibond 800/epoxy bond
Posted : 2012-02-19 8:32 PM
Post #36582 - In reply to #36581
Dave,

Unibond does not stick well to epoxy or bondo. As you read Durhams Rock Hard is a good filler for under Unibond.

Darryl Keil


 
^ Top
Dave Carter

Posts: 15

Joined: 2012-01-25
Location: Hendersonville, NC

User Profile 
Subject : RE: Unibond 800/epoxy bond
Posted : 2012-02-20 8:13 AM
Post #36583 - In reply to #36582
Thanks.
I will get some Rock Hard and try it.
Dave
back
Navigate threads:
< Previous Thread :: Next Thread >
Legend      Notification  
Administrator
Forum Moderator
Registered User
Unregistered User
 Toggle e-mail notification


Logo by MAZY
Running MegaBBS ASP Forum Software v1.5.14b public beta