Darryl Keil Last Activity 2025-09-09 11:09 AM
2 replies, 1442 viewings
 
back
Navigate threads:
< Previous Thread :: Next Thread >
 
^ Top
Don Stephan

Posts: 825

Joined: 2003-07-18
Location: Cincinnati, Ohio

User Profile 
Subject : Two Ply, Between Pressings
Posted : 2004-04-16 8:16 PM
Post #31450
It is usually recommended that a new pressing of veneer onto a substrate be stood up in the open overnight, presumably to continue curing and to dry out. What would be recommended for two ply veneer that has just come out of the vacuum bag? Can't even leave it uncovered on a flat surface overnight as it might curl up.


 
^ Top
ray

 
Subject : RE: Two Ply, Between Pressings
Posted : 2004-04-16 9:27 PM
Post #31452 - In reply to #31450
I always lay a piece of plwood or something over it, it will curl up if you leave it flat, or standing up. If using unibond 800 I always put a little in a plastic baggie. Then estimate my time of curring with the mixture and temperature. I then make sure the sample has hardened, then leave it in the bag another 30 minutes past my calculations.


 
^ Top
ray

 
Subject : RE: Two Ply, Between Pressings
Posted : 2004-04-16 9:31 PM
Post #31453 - In reply to #31452
You know what I think I mis read your question. In my mind I thought you were just making a 2 ply. Then leaving overnite before pressing onto a substrate. So never mind anything I said as I'm confused.
back
Navigate threads:
< Previous Thread :: Next Thread >
Legend      Notification  
Administrator
Forum Moderator
Registered User
Unregistered User
 Toggle e-mail notification


Logo by MAZY
Running MegaBBS ASP Forum Software v1.5.14b public beta