| | |
Michael Brussard
|
Darryl,Thanks so much for the answers to my questions. I'll let you know how the Compact 100 works for the project as I will be ordering soon. Best Regards,Michael Brussard: Michael,: As far as your veneer goes, tape up the two species together and press the entire panel up at once.: Check certainlywood.com or flamingoveneer.com for your veneer.: We sell a small affordable vacuum press that will press up to 49"x 49" panels which is $298. You can check it out on the vacupress.com web site under Compact 100 in the products section. You can get there from the bottom of this forum.: Good luck with your veneering project.: Sincerely: Darryl Keil: : : I will be attempting my first veneer job in the very near future and : : need a few questions answered. I will be making six cabinet panels : : on 1/4" AAA grade cherry plywood 14 1/2" x 28 1/2". I will be : : placing an 11" x 25" veneer of lacewood centered on the panel borderd : : by a 1 3/4" veneer strip of sapeli mitered at the corners creating : : a framed appearance. Question 1). Do I cut and glue up both the : : lacewood and sapelli at the same time, or do I first cut and glue : : just the centered lacewood, let dry and then follow up with the sapeli : : border? Question 2). Where is the best place to buy my exotic : : hardwood veneers? Question3). I'm interested in purchasing a vaccum : : press for small jobs as described (I am a wood artist and craftsman : : for fun and enjoyment with 25 years experience, but its not my career) : : so I therefore looking for an affordable press. Any suggestions and : : compariable prices?: : Many thanks in advance.: : Michael
|
|
