Bob s
Posts: 5
Joined: 2014-04-28
Location: Auckland NZ
 User Profile |
Yes its possible, impregnate carbon fiber with epoxy and press it flat or otherwise it will be very brittle so you may want some kevlar in there too to hold it together but fiberglass will do it too, wax a meltica/melamine board and use peelply if you want on both sides, if you use a holey plastic over it all then some dry fiberglass the fiberglass will absorb any excess resin that bleeds through the holey plastic and will separate with ease.
What ever you use it will need to be multy directional as in a box weave carbon and glass but no need for the veneer.
|
