Darryl Keil Last Activity 2025-09-09 11:09 AM
1 replies, 1217 viewings
 
back
Navigate threads:
< Previous Thread :: Next Thread >
 
^ Top
Jason

Posts: 34

Joined: 2010-05-03
Location: Montana

User Profile 
Subject : will my unibond hold
Posted : 2014-03-13 2:10 PM
Post #37104
I am hand clamping my table crossband with uni bond 800.
Shop temp at about 70-75 degrees.
Glue ratio 4-1.
Applied the glue with foam roller, placed veneer, added a 3/4" piece of melamine on top, and c-clamps. I then poured a small amount in the ziploc bag. Clamped for 3 hours. Pulled sample out from zippy in one piece. I am noticing the zippy sample is still pliable after an hour out of its bag. I'm thinking I should have added more heat I just didn't know how with clamps being in the way. Question, will my crossband be OK? Will the resin harden up with time?


 
^ Top
Don Stephan

Posts: 825

Joined: 2003-07-18
Location: Cincinnati, Ohio

User Profile 
Subject : RE: will my unibond hold
Posted : 2014-03-16 12:47 PM
Post #37107 - In reply to #37104
My experience is that plastic resin glues do not become fully rigid for 12-24 hours as long as the minimum temperature is maintained. Did your sample become rigid overnight?
back
Navigate threads:
< Previous Thread :: Next Thread >
Legend      Notification  
Administrator
Forum Moderator
Registered User
Unregistered User
 Toggle e-mail notification


Logo by MAZY
Running MegaBBS ASP Forum Software v1.5.14b public beta