joe mcaskill
Posts: 24
Joined: 2011-10-25
Location: charlottetown, pei, canada
 User Profile |
The second application of softener and reducing the number of sheets in the stack worked and the crotch came out nice and flat. i am getting ready to start glue up and have a couple of questions.
I am gluing to 1/4" mdf and am going to apply the cross banding first because it will be easier to scrape the veneer tape off the veneer with it glued to the panel.
I am using ultra cat glue. a couple of questions:
Do I have to have the glue and all panels at 70 degrees before applying the glue?
I am going to put an electric blanket over the bag when drying.
After i take the panels out of the bag to scrape should I keep them stacked together or separate to allow air movement around the panels.
the panels are 18"x 26".
Thanks
Joe
|
