Darryl Keil Last Activity 2025-09-09 11:09 AM
1 replies, 1579 viewings
 
back
Navigate threads:
< Previous Thread :: Next Thread >
 
^ Top
Parry

Posts: 1

Joined: 2007-09-24
Location: Bedford, Nova Scotia, Canada

User Profile 
Subject : trouble shooting the vacumn pump
Posted : 2007-09-24 1:09 PM
Post #34062
I have a 10cfm hi-flo vacupress and I am expierencing a pressure problem
The auto does not come on or kick in. The continous works well but then
it will not auto start when the pressure releases. Is this in the high low control or is it in the switch


 
^ Top
Darryl Keil

Posts: 1455

Joined: 2003-05-22
Location: Maine

User Profile 
Subject : RE: trouble shooting the vacumn pump
Posted : 2007-09-24 8:50 PM
Post #34066 - In reply to #34062
Parry,

If I understand you correctly, you're saying that the pump will not turn on at all in the auto cycle mode. If this is the case it may be in the power switch or the vacuum switch. Could be a loose connection between the two.

I suggest calling me with the unit in front of you so we can diagnose it over the phone. 207-725-0935. I'm sure its something simple, it usually is.

Sincerely
Darryl Keil
back
Navigate threads:
< Previous Thread :: Next Thread >
Legend      Notification  
Administrator
Forum Moderator
Registered User
Unregistered User
 Toggle e-mail notification


Logo by MAZY
Running MegaBBS ASP Forum Software v1.5.14b public beta