J.P.
Posts: 2
Joined: 2007-06-24
Location: Earlysville, VA
 User Profile |
I am building a large breakfront and will have veneered panels of different lengths and widths but all the same thickness and veneer type on both sides.
I was wondering if I could use one caul,1/4" melamine, on the bottom and one caul,3/4" melamine, on the top if I arrange the panels so ther is no more than a 4" gap between the panels and the edges are flush with the caul edges?
Or would it be preferable to do a couple of different stacks separately in the bag with cauls the same size as the panels?
Thanks,
J.P.
|
