Darryl Keil Last Activity 2025-09-09 11:09 AM
1 replies, 1270 viewings
 
back
Navigate threads:
< Previous Thread :: Next Thread >
 
^ Top
Dave B

Posts: 1

Joined: 2006-04-01

User Profile 
Subject : Top caul
Posted : 2006-04-01 6:16 PM
Post #32945
Hi

We're using three ply veneer over tricell. Tricell needs to be exact size before bagging. Some parts are about 4'x6' bent to 90* angle with 4"radius. We're leaving veneer 1/4" proud all around. What can we use for top caul/platten that will take that radius, protect the edge of veneer overhang, is cheap, and can be cut on our cnc router.

Thanks,
Dave


 
^ Top
Darryl Keil

Posts: 1455

Joined: 2003-05-22
Location: Maine

User Profile 
Subject : RE: Top caul
Posted : 2006-04-03 7:59 PM
Post #32947 - In reply to #32945
Dave,

Well, you not going to use a very thick caul with such a tight radius. I would use 1/8" or 1/4" bending ply depending on what you can get. As far as an overhang I would make your panel a little larger and forget the overhang. Just come back afterwards and trim your panel down to the finish dimension.

Sincerely
Darryl Keil
back
Navigate threads:
< Previous Thread :: Next Thread >
Legend      Notification  
Administrator
Forum Moderator
Registered User
Unregistered User
 Toggle e-mail notification


Logo by MAZY
Running MegaBBS ASP Forum Software v1.5.14b public beta