Darryl Keil Last Activity 2025-09-09 11:09 AM
1 replies, 1185 viewings
 
back
Navigate threads:
< Previous Thread :: Next Thread >
 
^ Top
Roger

Posts: 1

Joined: 2006-02-14
Location: London Ontario Canada

User Profile 
Subject : Connector on bladder
Posted : 2006-02-14 12:46 PM
Post #32813
I have a custom bladder from Vacupress and the connector on the bladder is coming off. Any tips on cluing it back on (It's not all off yet) For example it I carefully applied glue to the loose areas and then filled the bladder with air would that be enough pressure to hold the connector in place while the clue sets?

Thanks

Roger


 
^ Top
Darryl Keil

Posts: 1455

Joined: 2003-05-22
Location: Maine

User Profile 
Subject : RE: Connector on bladder
Posted : 2006-02-15 9:08 AM
Post #32814 - In reply to #32813
Roger,

You have two options. You can remove the nipple entirely and put a new one on or spot glue the one you have. Provided your using the adhesive that comes in our patch kit, all you need is light pressure to repair the fitting. Make sure you let it sit for 12 hours.

Sincerely
Darryl Keil
back
Navigate threads:
< Previous Thread :: Next Thread >
Legend      Notification  
Administrator
Forum Moderator
Registered User
Unregistered User
 Toggle e-mail notification


Logo by MAZY
Running MegaBBS ASP Forum Software v1.5.14b public beta