Darryl Keil Last Activity 2024-10-10 3:42 PM
1 replies, 953 viewings
 
back
Navigate threads:
< Previous Thread :: Next Thread >
 
^ Top
Anton Gerner

Posts: 45

Joined: 2003-09-04
Location: Melbourne, Australia

User Profile 
Subject : veneer jointing jig for panel saw
Posted : 2005-01-19 4:09 AM
Post #31995
I've just completed making a veneer jointing jig which sits on the sliding table of my Altendorf panel saw. It has pneumatic rams that operate a pressure beam that comes down from above to flatten and hold the veneer in place. Still needs a little fine tuning, but I will post some pictures here next week when I get a chance.

So far it works REALLY REALLY well and has finally solved my veneer jointing problem.


 
^ Top
Richard

 
Subject : RE: veneer jointing jig for panel saw
Posted : 2005-02-03 10:41 PM
Post #32027 - In reply to #31995
Hi, Anton,
I used to work for a company that used exactly the technique you have described, on an Altendorf panel saw. Usinng that technique we would joint stacks of 10 or 12 veneers in a single pass. It does work very well. The downside is that such a saw costs a pretty big bundle and it takes up some significant square footage in the shop. I'd like to see the photos none the less. Sincerely, Richard.
back
Navigate threads:
< Previous Thread :: Next Thread >
Legend      Notification  
Administrator
Forum Moderator
Registered User
Unregistered User
 Toggle e-mail notification


Logo by MAZY
Running MegaBBS ASP Forum Software v1.5.14b public beta