Darryl Keil
Posts: 1455
Joined: 2003-05-22
Location: Maine
 User Profile |
vermonterken,
Getting veneer or plywood to conform to a compound curve always has its limits,in a vacuum bag as well as any other method. Using plywood won't get you very far. Better to use just veneer and layer it up 2 to 4 sheets in a pressing until you end up at your desired thickness. If your curve is gentle enough you can use 1/16" veneers which will get you there with less lay ups.
Its a real trial and error process.
Sincerely
Darryl Keil
|
