| | |
TBB
|
I have successfully used an electric blanket draped over the bag after vacuum has been established to speed up the curing process - this is in particular effective when you need to mix a slower setting batch of glue (as when doing multiple laminations). Most blankets sold today provide information in the package as to what the actual temperature the manufacturer's control setting equate to, which, when combined with the temperature chart provided with the glue, ought to give you a fairly accurate gauge of your pressing timeFailing that, placing a small amount of glue in a Ziploc baggie between the bag and the blanket will also give you an acceptable measure of cure.: Frank; Is there a proven method of heating the glue whilst vac pressing to up productivity. The laminates are 6 times 3mm: Bendy Ply using UF adhesive.
|
|
