Darryl Keil Last Activity 2026-01-12 8:29 AM
1 replies, 1178 viewings
 
back
Navigate threads:
< Previous Thread :: Next Thread >
 
^ Top
Craig

 
Subject : Veneering Sheet Metals
Posted : 2001-02-02 10:48 PM
Post #30485
I am thinking of experimenting with some decorative metal veneering, such as copper sheeting. It would be used as an accent in a field of wood veneer. What is the best method for veneering the metal (copper) to the substrate? Can it, should it, be done in the bag? What's the best adhesive to use? Can you use Unibond with metals?Thanks.



 
^ Top
Darryl Keil

 
Subject : Veneering Sheet Metals
Posted : 2001-02-03 3:31 PM
Post #30529 - In reply to #30485
Dear Craig,You can glue copper in the bag just fine but Unibond 800 is not recommended for metal. I would suggest epoxy or polyurethane glue. Be sure to rough up the metal before glueing.SincerelyDarryl Keil: I am thinking of experimenting with some decorative metal veneering, : such as copper sheeting. It would be used as an accent in a field of : wood veneer. : : What is the best method for veneering the metal (copper) to the : substrate? Can it, should it, be done in the bag? What's the best : adhesive to use? Can you use Unibond with metals?: Thanks.
back
Navigate threads:
< Previous Thread :: Next Thread >
Legend      Notification  
Administrator
Forum Moderator
Registered User
Unregistered User
 Toggle e-mail notification


Logo by MAZY
Running MegaBBS ASP Forum Software v1.5.14b public beta