Darryl Keil Last Activity 2026-01-12 8:29 AM
1 replies, 736 viewings
 
back
Navigate threads:
< Previous Thread :: Next Thread >
 
^ Top
Andrew Wappett

 
Subject : oil and wax finish
Posted : 2000-03-02 10:20 PM
Post #30450
I am interested in finding out more about the appearance and durability of a simple penetrating oil finish (such as Watco, or Tung oil) on a veneered surface. I am a one - man shop and prefer this type of finish, but would like to get involved in veneering. If an oil and wax type finish isn't practical or doesn't look decent, I would appreciate any suggestions for a simple finish that is practical for an operation like mine. Thank you for your help.



 
^ Top
Darryl Keil

 
Subject : oil and wax finish
Posted : 2000-03-06 9:22 AM
Post #30454 - In reply to #30450
Dear Andrew,Oil and wax is not a recommended finish for veneer. It does not really provide enough protectionIf you dont have the ability to apply a sprayed finish, try a brushable laquer. It should give you a decent finish.SincerelyDarryl Keil: I am interested in finding out more about the appearance and : durability of a simple penetrating oil finish (such as Watco, or Tung : oil) on a veneered surface. I am a one - man shop and prefer this : type of finish, but would like to get involved in veneering. If an : oil and wax type finish isn't practical or doesn't look decent, I : would appreciate any suggestions for a simple finish that is : practical for an operation like mine. Thank you for your help.




back
Navigate threads:
< Previous Thread :: Next Thread >
Legend      Notification  
Administrator
Forum Moderator
Registered User
Unregistered User
 Toggle e-mail notification


Logo by MAZY
Running MegaBBS ASP Forum Software v1.5.14b public beta