Darryl Keil Last Activity 2026-01-12 8:29 AM
1 replies, 833 viewings
 
back
Navigate threads:
< Previous Thread :: Next Thread >
 
^ Top
Gordon Crandall

 
Subject : continous operating vacuum pump
Posted : 2000-03-02 6:21 AM
Post #30448
I have been using the Compact 100 vacupress system for several years . As you know the pump must run continuously. I have always used one of the typical yellow glues letting the pump operate about one hour with excellent results. My next project will have a very large number of small pieces. I'm considering using a pre-catalyzed urea-fomaldehyde glue to provide a more stable bond. However, this glue requires about four hours press time; will my vacuum pump operate this length of time without overheating or otherwise becoming damaged?



 
^ Top
Darryl Keil

 
Subject : continous operating vacuum pump
Posted : 2000-03-02 10:13 PM
Post #30449 - In reply to #30448
Dear Gordon,This type of pump can run continuously for extended periods, so go ahead and dont be concerned about the longer running time.sincerelyDarryl Keil: I have been using the Compact 100 vacupress system for several years . As you know the pump must run continuously. I have : always used one of the typical yellow glues letting the pump operate about one hour with excellent results. My next project will have : a very large number of small pieces. I'm considering using a pre-catalyzed urea-fomaldehyde glue to provide a more stable bond. : However, this glue requires about four hours press time; will my vacuum pump operate this length of time without overheating or : otherwise becoming damaged?
back
Navigate threads:
< Previous Thread :: Next Thread >
Legend      Notification  
Administrator
Forum Moderator
Registered User
Unregistered User
 Toggle e-mail notification


Logo by MAZY
Running MegaBBS ASP Forum Software v1.5.14b public beta