Darryl Keil Last Activity 2026-01-12 8:29 AM
1 replies, 772 viewings
 
back
Navigate threads:
< Previous Thread :: Next Thread >
 
^ Top
AndyO

 
Subject : Spreading glue
Posted : 2000-02-27 8:54 AM
Post #30438
Im going to spread Unibond800 glue and want to make a spreader. I thought of taking a piece of old plastic and cuting notches in it in a comb like fashion. The width and depth of the notches will dictate how much glue is on the substrate. Any idea how wide/deep the notches should be. ie: how much glue is enough. Maybe it just doesn't matter as long as you get enough glue.



 
^ Top
Darryl Keil

 
Subject : Spreading glue
Posted : 2000-02-29 9:58 PM
Post #30447 - In reply to #30438
Dear Andy,Use a paint pan and a cheap black foam roller you can get from any hardware store. It willput down a uniform glue line nice and quickly. A foam roller will also allow you to adjust theamount of glue you apply. Notched trowels won't do that.sincerelyDarryl Keil: Im going to spread Unibond800 glue and want to make a spreader. I thought of taking a piece of old plastic and cuting : notches in it in a comb like fashion. The width and depth of the notches will dictate how much glue is on the substrate. Any : idea how wide/deep the notches should be. ie: how much glue is enough. Maybe it just doesn't matter as long as you get : enough glue.
back
Navigate threads:
< Previous Thread :: Next Thread >
Legend      Notification  
Administrator
Forum Moderator
Registered User
Unregistered User
 Toggle e-mail notification


Logo by MAZY
Running MegaBBS ASP Forum Software v1.5.14b public beta