Darryl Keil Last Activity 2026-01-12 8:29 AM
1 replies, 1073 viewings
 
back
Navigate threads:
< Previous Thread :: Next Thread >
 
^ Top
Peter B.

 
Subject : Grain direction...
Posted : 1999-12-03 9:29 PM
Post #30324
In your recent reply you state: "on a good grade of plywood, having the face veneer run the same directionas the one underneath is not a real problem.." Specifically: I plan on a sunburst pattern veneer on 3/4" furniture grade plywood,does the plywood grain orientation make a difference? Are there any pro's/cons in using MDF or particle board instead of plywood?thanxpeter b.



 
^ Top
Dear Peter

 
Subject : Grain direction...
Posted : 1999-12-06 5:54 PM
Post #30332 - In reply to #30324
Dear Peter,With a sunburts pattern I really recommend you use MDF or particle board because the veneeris going in a number of directions and you have a lot of seams that you dont want any problemswith. These two substrates will give you the most stable base to veneer on top of.SincerelyDarryl Keil: In your recent reply you state: "on a good grade of plywood, having the face veneer run the same direction: as the one underneath is not a real problem.." Specifically: I plan on a sunburst pattern veneer on 3/4" furniture grade : plywood,does the plywood grain orientation make a difference? Are there any pro's/cons in using MDF or particle board : instead of plywood?: thanx: peter b.
back
Navigate threads:
< Previous Thread :: Next Thread >
Legend      Notification  
Administrator
Forum Moderator
Registered User
Unregistered User
 Toggle e-mail notification


Logo by MAZY
Running MegaBBS ASP Forum Software v1.5.14b public beta