| | |
Darryl Keil
|
Dear Rick,Although the iron on technique does work, I only use it when there is no other way. It give a better bond to clamp your edge banding on. As far as glue squeeze out, a little bit is just going to happen and really not a big problem. Because all veneer needs to be sanded before finishing I just scrape the glue off with a cabinet scraper and then do my sanding.SincerelyDarryl Keil: What is the best solution for edge banding a flat panel? My first : thought was to use yellow glue on both the edge of the panel and the : banding, let dry then iron it on. My concerns are keeping glue off : the already veneered surfaces. Also if you edge band first then how : do you keep veneering glue from getting on the edge band?
|
|
