Darryl Keil Last Activity 2026-01-12 8:29 AM
1 replies, 1330 viewings
 
back
Navigate threads:
< Previous Thread :: Next Thread >
 
^ Top
Steve Levinson

 
Subject : Wiggle wood lam veneer slips
Posted : 1999-11-05 4:12 AM
Post #30279
Greetings again!I havent been this excited about woodworking (Im a lifelong full time woodworker) in long time. Cant wait to start VACUUMING. Mustnt let the women in my life hear this though... I will be laminating 3/4" curved doors out of 3 layers of 3/8 wiggle wood with a veneer "slip" between the layers.What is the best, easiest, cheapest veneer to use for these internal "slips." Ive been assuming paperbacked isok for this purpose. Is their another choice?Thanks for this and my other questions I forgot to signSteve Levinson



 
^ Top
Darryl Keil

 
Subject : Wiggle wood lam veneer slips
Posted : 1999-11-07 5:52 PM
Post #30284 - In reply to #30279
Dear Steve,Your "slip" or what I call cross banding veneer can be almost anything. Paperback is fine or a wide backer grade raw veneer is also good, I often use backer grade polar or mahogany. There is also a paper product called Yorkite that is good for this purpose. What you use is not that critical.SincerelyDarryl Keil: Greetings again!: I havent been this excited about woodworking (Im a lifelong full time woodworker) in long time. Cant wait to start : VACUUMING. Mustnt let the women in my life hear this though... : I will be laminating 3/4" curved doors out of 3 layers of 3/8 wiggle wood with a veneer "slip" between the layers.: What is the best, easiest, cheapest veneer to use for these internal "slips." Ive been assuming paperbacked is: ok for this purpose. Is their another choice?: Thanks for this and my other questions I forgot to sign: Steve Levinson
back
Navigate threads:
< Previous Thread :: Next Thread >
Legend      Notification  
Administrator
Forum Moderator
Registered User
Unregistered User
 Toggle e-mail notification


Logo by MAZY
Running MegaBBS ASP Forum Software v1.5.14b public beta