| | |
Darryl Keil
|
Dear David,Probably not, if I understand what you are saying. You have a half round piece of wood thatis going around a curve. If this is the case, the veneer will pucker up and fold over on itself.If you had just a quarter round, a fairly large quarter round and the curve was gentle, youcould veneer that in a vacuum press with a little massaging of the veneer through the bag.Even that can be difficult depending on the veneer you use. If you want to talk about it in more detail you can call me at 207-725-0935, and I would be more than happy speak with you.SincerelyDarryl Keil: is it possible to veneer a curve half round piece of wood? it is to : be installed in a bar-
|
|
