Darryl Keil Last Activity 2025-09-09 11:09 AM
1 replies, 1304 viewings
 
back
Navigate threads:
< Previous Thread :: Next Thread >
 
^ Top
Daryl Rosenblatt

 
Subject : Compact 100
Posted : 2001-05-08 11:08 AM
Post #30127
I have the Compact 100 system. Is there a way (I couldn't find it in the manual) to adjust the pressure? You recommended I laminate the honeycomnb resin first at 15 hg, then apply the final veneer at 30hg. How do I lower the ppressure? Thanks.



 
^ Top
Darryl Keil

 
Subject : Compact 100
Posted : 2001-05-09 8:46 AM
Post #30129 - In reply to #30127
Dear Daryl,Since the Compact 100 is a continous running pump it will not shut off at a particular vacuum level and then maintain that. What you can do is unscrew the in-line filter jar a little until the gauge reads the desired pressure. Basically you are creating a small leak so the pump will not be able to reach full vacuum. This should do the job.SincerelyDarryl Keil: I have the Compact 100 system. Is there a way (I couldn't find it in : the manual) to adjust the pressure? You recommended I laminate the : honeycomnb resin first at 15 hg, then apply the final veneer at 30hg. : How do I lower the ppressure? Thanks.
back
Navigate threads:
< Previous Thread :: Next Thread >
Legend      Notification  
Administrator
Forum Moderator
Registered User
Unregistered User
 Toggle e-mail notification


Logo by MAZY
Running MegaBBS ASP Forum Software v1.5.14b public beta