Darryl Keil Last Activity 2025-09-09 11:09 AM
1 replies, 822 viewings
 
back
Navigate threads:
< Previous Thread :: Next Thread >
 
^ Top
Jim Donovan

 
Subject : Effect of cut method on pull
Posted : 2002-03-29 11:30 AM
Post #29836
For the same species will the pull be greatly differant between plain sliced and rotary cut veneer. Can I use Kewazinga on the face and plain cut Bubinga on the back (to save some cost) ?



 
^ Top
John Randazzo

 
Subject : Effect of cut method on pull
Posted : 2002-03-30 9:45 AM
Post #29838 - In reply to #29836
Jim, That will work fine. Generally, I'll use a backer grade veneer, usually maple or mahogany, on the back side of all my work. You'll find that backer grade is less expensive and is usually pretty wide so it saves alot of time. John.
back
Navigate threads:
< Previous Thread :: Next Thread >
Legend      Notification  
Administrator
Forum Moderator
Registered User
Unregistered User
 Toggle e-mail notification


Logo by MAZY
Running MegaBBS ASP Forum Software v1.5.14b public beta