| | |
Darryl Keil
|
Dear Ramiro,First, be sure your table surface is one piece plastic laminate with no penetration except the bulk head fitting. If you know that is fine check around the gasket with some colored water on a sponge, that should show you where the leak is. If you still cannot find it, I suggest giving us a call so we can talk more in depth.SincerelyDarryl Keil: I just recently put together the press i purchased from vacupress : systems. Though the air pressure doesnt even pass 10 on the gauge. I : believe there is a leak somewhere in the frame. What is the best way : to find the leak?
|
|
