Darryl Keil Last Activity 2026-04-29 12:40 AM
1 replies, 1157 viewings
 
back
Navigate threads:
< Previous Thread :: Next Thread >
 
^ Top
Steve

 
Subject : Oily veneer
Posted : 2002-12-13 5:39 PM
Post #29587
I want to press some Camphorwood Burl veneer panels in my Vacupress 200.The wood is very aromatic and slightly oily.Will the Unibond 800 glue hold ? Thanks for your time and input.Steve



 
^ Top
Darryl Keil

 
Subject : Oily veneer
Posted : 2002-12-14 1:09 PM
Post #29588 - In reply to #29587
Steve,Unibond 800 is an excellent glue for most oily woods and should work fine on Camphorwood. I would still recommend a small test just to be sure on the particular veneer you have. Wait 24 hours, then try to tear it off. If it holds well, your good to go. Anytime I use a veneer I am not familiar with I always do a testSincerelyDarryl Keil: I want to press some Camphorwood Burl veneer panels in my Vacupress : 200.The wood is very aromatic and slightly oily.Will the Unibond 800 : glue hold ? Thanks for your time and input.Steve
back
Navigate threads:
< Previous Thread :: Next Thread >
Legend      Notification  
Administrator
Forum Moderator
Registered User
Unregistered User
 Toggle e-mail notification


Logo by MAZY
Running MegaBBS ASP Forum Software v1.5.14b public beta