Darryl Keil Last Activity 2026-04-30 11:46 AM
1 replies, 1204 viewings
 
back
Navigate threads:
< Previous Thread :: Next Thread >
 
^ Top
Don Wacker

 
Subject : Glues and press
Posted : 2002-11-15 11:09 AM
Post #29536
I've been doing flat veneers the old fashion way for quite some time. Hide glue and a wood screw press with 75 wooded screws. Can the new veneer glues be used without a vac press? Ive tried pva with poor results. Hide is great stuff but if you have a spill you get a bubble, of course it can be fixed but I would like to avoid it all.Don



 
^ Top
Darryl Keil

 
Subject : Glues and press
Posted : 2002-11-16 1:27 PM
Post #29539 - In reply to #29536
Don,Modern glues like PVA's and Urea Resin glues can be used by any press not just vacuum. The key is very uniform pressure, if you have that you will have success. In fact, its more the uniformity of pressure than the amount of it, although you do need a reasonable amount too. This is why a vacuum press works so well, its so uniform.SincerelyDarryl Keil: I've been doing flat veneers the old fashion way for quite some time. : Hide glue and a wood screw press with 75 wooded screws. Can the new : veneer glues be used without a vac press? Ive tried pva with poor : results. Hide is great stuff but if you have a spill you get a : bubble, of course it can be fixed but I would like to avoid it all.: Don
back
Navigate threads:
< Previous Thread :: Next Thread >
Legend      Notification  
Administrator
Forum Moderator
Registered User
Unregistered User
 Toggle e-mail notification


Logo by MAZY
Running MegaBBS ASP Forum Software v1.5.14b public beta