Darryl Keil Last Activity 2025-02-12 2:48 PM
1 replies, 678 viewings
 
back
Navigate threads:
< Previous Thread :: Next Thread >
 
^ Top
Dan Twomey

 
Subject : Correct amount of bleed through?
Posted : 2002-09-14 6:17 PM
Post #29415
I did a test veneer on some mahogany and MDF. When done I got some shiny spots on about 25% of the surface area which I assume is glue bleed through. Is this too much or too little bleed through for mahogany? Any input would be appreciated.Regards,Dan



 
^ Top
Darryl Keil

 
Subject : Correct amount of bleed through?
Posted : 2002-09-15 4:13 PM
Post #29419 - In reply to #29415
Dan,25% of the veneer surface is a bit too much bleed through. What you want is just a little spotting here and there so you know you had enough glue plus a little extra that ended up bleeding through. On Mahogany excess bleed through wont really hurt anything it just adds extra work scraping it off.SincerelyDarryl Keil: I did a test veneer on some mahogany and MDF. When done I got some : shiny spots on about 25% of the surface area which I assume is glue : bleed through. Is this too much or too little bleed through for : mahogany? Any input would be appreciated.: Regards,: Dan
back
Navigate threads:
< Previous Thread :: Next Thread >
Legend      Notification  
Administrator
Forum Moderator
Registered User
Unregistered User
 Toggle e-mail notification


Logo by MAZY
Running MegaBBS ASP Forum Software v1.5.14b public beta