| | |
Darryl Keil
|
Dear Kevin,Your question about the forum, no you can't and its a good idea. Thisis an old forum that has a simple system. I have been meaning to upgrade it but other things keep occuping my time.About your bell, its a tough one if you want to veneer the entire inside in one shot and have a clean return seam. I would do it in three steps. Glue the veneer in about half the bell first, tape the next piece tight to one side of the first piece and glue all of it except the last couple of inches before it meets the other seam. Now cut the end of the remaining unglued section of veneer so you have a good final seam and then glue it down. Believe me, this is easier to put in print than it is to do but it can be done. You dont really have to veneer the outside because of the shape and thickness.SincerelyDarryl Keil: Darryl:: 1. Is it possible to search the Forum postings so that I don't ask a: questions that has been asked and answered before?: 2. Do you have suggestions (or templates) for veneering the inside: curved surface of a bell mouth? Bell dimensions:: 36 inches max dia, : 18 inches min dia, : 12 inches depth. : Substrate MDF. : Bell walls approx one inch thick. Bell mouth opens completely flat.: 3. Will veneer need also to be applied to the outside surface?: Thanks: Kevin
|
|
