Darryl Keil Last Activity 2026-01-12 8:29 AM
1 replies, 1025 viewings
 
back
Navigate threads:
< Previous Thread :: Next Thread >
 
^ Top
derek boyda

 
Subject : looking for a source of plywood core veneers
Posted : 2003-06-09 3:54 PM
Post #28997
I am looking for a source or suggestions on what to use for core material on a bent laminated plywood desk top (bent from desk top to floor) with exposed edges and mahogany face veneer. Sources in Canada would be a big help.



 
^ Top
Darryl Keil

 
Subject : looking for a source of plywood core veneers
Posted : 2003-06-10 6:08 PM
Post #29003 - In reply to #28997
Derek,What about 1/8" bending birch or bending poplar. You can usually get them from the local plywood supplier to cabinet shops. I dont think you will find any with a mahogany face but you can apply that yourself. They do make a 3/8" bending ply but since you want the edge to show Im not sure if this material would be appealing.SincerelyDarryl Keil: I am looking for a source or suggestions on what to use for core : material on a bent laminated plywood desk top (bent from desk top to : floor) with exposed edges and mahogany face veneer. Sources in Canada : would be a big help.
back
Navigate threads:
< Previous Thread :: Next Thread >
Legend      Notification  
Administrator
Forum Moderator
Registered User
Unregistered User
 Toggle e-mail notification


Logo by MAZY
Running MegaBBS ASP Forum Software v1.5.14b public beta