Darryl Keil Last Activity 2026-04-21 2:19 PM
1 replies, 954 viewings
 
back
Navigate threads:
< Previous Thread :: Next Thread >
 
^ Top
LucieV

 
Subject : How to cure Burl veneer
Posted : 2003-05-23 8:46 PM
Post #28939
I'm asking for a friend of mine that doesn't have the internet.He has a piece of burr and he would like to resaw it to make veneer.He's wondering if there is anything special about curing it.Your help would be very appreciated since I haven't found anything on the subject on the internet.Thank you



 
^ Top
Darryl Keil

 
Subject : How to cure Burl veneer
Posted : 2003-05-25 10:41 PM
Post #28941 - In reply to #28939
Lucie,There really isnt any curing that you need to do. The burl just needs to be dry. If its wet, slice it extra thick ( about a 3/16" and then dry it down from there. When it is dry you can run it through a wide belt sander and bringing it down to 3/32" or less.SincerelyDarryl Keil: I'm asking for a friend of mine that doesn't have the internet.: He has a piece of burr and he would like to resaw it to make veneer.: He's wondering if there is anything special about curing it.: Your help would be very appreciated since I haven't found anything on : the subject on the internet.: Thank you
back
Navigate threads:
< Previous Thread :: Next Thread >
Legend      Notification  
Administrator
Forum Moderator
Registered User
Unregistered User
 Toggle e-mail notification


Logo by MAZY
Running MegaBBS ASP Forum Software v1.5.14b public beta