Darryl Keil Last Activity 2026-04-24 10:40 AM
1 replies, 1077 viewings

 
back
Navigate threads:
< Previous Thread :: Next Thread >
 
^ Top
Les Linton

 
Subject : Flattening Solution
Posted : 2003-04-09 10:22 AM
Post #28835

I have been collecting veneers and am currently setting up my Vacu Press system.I am ready to start and have a couple questions on the flattening solution that you have often shown.Will the glue in the solution cause the veneer to not darken when a finish is applied? Tung oil or Urethane.Is it critical to change the paper when drying every three hours. I do need to go to work and sleep.Les



 
^ Top
Darryl Keil

 
Subject : Flattening Solution
Posted : 2003-04-09 9:04 PM
Post #28840 - In reply to #28835

Les,The amount of glue in the solution is not enough to prevent good penatration of the finish or stain. Ive used it in many different situations and have never had a problem.In terms of changing the paper, the important thing is to change it three times each day. The time between changing is not that critical.SincerelyDarryl Keil: I have been collecting veneers and am currently setting up my Vacu : Press system.: I am ready to start and have a couple questions on the flattening : solution that you have often shown.: Will the glue in the solution cause the veneer to not darken when a : finish is applied? Tung oil or Urethane.: Is it critical to change the paper when drying every three hours. I : do need to go to work and sleep.: Les




back
Navigate threads:
< Previous Thread :: Next Thread >

Legend      Notification  
Administrator
Forum Moderator
Registered User
Unregistered User
Toggle e-mail notification


Logo by MAZY
Running MegaBBS ASP Forum Software v1.5.14b public beta