Darryl Keil Last Activity 2026-04-25 12:44 PM
1 replies, 1059 viewings
 
back
Navigate threads:
< Previous Thread :: Next Thread >
 
^ Top
richard

 
Subject : banding method sound?
Posted : 2003-03-23 8:18 PM
Post #28783
I have started employing a banding method which I am a bit unsure of, and I wonder if others have done this. I press veneer to one face of solid hardwood, same or similar species, then I resaw and mill the bands downt to 1/16 thickness. The 16th inch bands are much easier to work with, than raw veneers, and can be bonded to the edge of the substrate using conventional methods. My only concern is whether the long term results will be satisfactory, and my edge banding will stay put. Has anyone else tried this? Thanks!



 
^ Top
Darryl Keil

 
Subject : banding method sound?
Posted : 2003-03-24 5:50 PM
Post #28787 - In reply to #28783
Richard,Sounds like a great idea. I cant see any problems with it. I have stiffened up edging veneer by apply it ninety degrees to a backer veneer but have never done it to solid.SincerelyDarryl Keil: I have started employing a banding method which I am a bit unsure of, : and I wonder if others have done this. I press veneer to one face of : solid hardwood, same or similar species, then I resaw and mill the : bands downt to 1/16 thickness. The 16th inch bands are much easier to : work with, than raw veneers, and can be bonded to the edge of the : substrate using conventional methods. My only concern is whether the : long term results will be satisfactory, and my edge banding will stay : put. Has anyone else tried this? Thanks!
back
Navigate threads:
< Previous Thread :: Next Thread >
Legend      Notification  
Administrator
Forum Moderator
Registered User
Unregistered User
 Toggle e-mail notification


Logo by MAZY
Running MegaBBS ASP Forum Software v1.5.14b public beta