Darryl Keil Last Activity 2025-02-12 2:48 PM
1 replies, 1092 viewings
 
back
Navigate threads:
< Previous Thread :: Next Thread >
 
^ Top
Brian Sanders

 
Subject : Glue mixture & Masonite
Posted : 2003-02-24 8:22 AM
Post #28696
I will be pressing some zebrawood veneer to some masonite for a long curved banquet this week and have plans to use yellow glue and post form the pannels. I wanted to thin the glue down a bit for more open time. What would be a good mixture and what is too thin?Thanks



 
^ Top
Darryl Keil

 
Subject : Glue mixture & Masonite
Posted : 2003-02-24 3:02 PM
Post #28697 - In reply to #28696
Brian,Do not thin the glue more than 5% with water. This is what a glue manufacturer told me.For your information, masonite is not the best substrate to veneer on, especially not tempered masonite. Tempered masonite has oils in it affect bonding. Regular masonite bonds OK but often you can pull a layer of masonite up with the veneer.SincerelyDarryl Keil: I will be pressing some zebrawood veneer to some masonite for a long : curved banquet this week and have plans to use yellow glue and post : form the pannels. I wanted to thin the glue down a bit for more open : time. What would be a good mixture and what is too thin?: Thanks




back
Navigate threads:
< Previous Thread :: Next Thread >
Legend      Notification  
Administrator
Forum Moderator
Registered User
Unregistered User
 Toggle e-mail notification


Logo by MAZY
Running MegaBBS ASP Forum Software v1.5.14b public beta