craig tufankjian
Posts: 308
Joined: 2004-02-01
Location: syracuse ny 13208
 User Profile |
Are the nipples on the 5x10 vinyl bag in the same location as my 4x12 poly bag? i'm in the middle of a barrel vault panel and it will not fit in the bag i have. form is 51 wide and rises 15 inches. the bag will only do about 13 1/2 high. the width will work but the height will not. i assume the 5x10 bag has a higher rise. would that be correct? if the 5x10 will work do i need to have a 5 by platen or will the 4 by i'm using now work. i'll be ordering one next week so any answers to stay ahead of the curve will be appreciated.
my other thought was to trim 2 inches off the 4 by platen , this will allow the bag to rise a little bit more but the form will hang over the platen.
also, unrelated to the first set of questions. I have a chance to buy a 14x14 bag poly. it does not have closures though. can i get custom made closures say like 8 foot?
|
