David Brady
Posts: 3
Joined: 2024-05-28
Location: Forest, VA
 User Profile |
I plan to veneer the show face of 1/2" MDF with walnut burl and the non-show face (inside lid of a humidor) with Spanish cedar of the same veneer thickness as the walnut. While I can line the show face veneer up accurately by cutting it oversized, taping the edge corners to the caul and then lining it up with the MDF substrate, how do I:
(1) keep the substrate from shifting after lining it up with the walnut, and
(2) keep the non-show face Spanish cedar in a fixed position (aligned) and from shifting while putting it in the vacuum bag and under pressure?
Really appreciate the experience and help from this forum!
|
