Darryl Keil
Posts: 1445
Joined: 2003-05-22
Location: Maine
 User Profile |
There’s a number of things I dont know about your layup, hence the difficulty of online communication and trouble shooting.
I’m pretty sure the issue is about the thickness difference between the inlay, border veneer and the quilted maple. I’m assuming the inlay was ever so slightly thicker than the maple which would impede the ability of getting good pressure at this point. I recommend 1/16” natural gum rubber between the veneer and cover sheet to handle the thickness variation between your three different materials. Be aware that the slightest thickness variation can cause the problem you are experiencing. Wetting the veneer tape did not release your glue bond but just showed the fact that the veneer was not fully bonded there.
|
