Dave Johns
Posts: 5
Joined: 2021-05-29
Location: Ottawa, Ontario Canada
 User Profile |
The delamination seems to occur where the maple meets the inlay (line). I can feel ripples in the maple in a number of areas around the edge. The middle of the maple field seems to have adhered quite well and is flat. Of course there was no tape in the middle so if was not exposed to any water from removal of the tape.
I have been doing some research and found that some advise scuff sanding of both the glue side of the veneer and the substate before glue up. Could this be the problem given that maple can be a challenge to bond?
|
