Phillip Briles
Posts: 9
Joined: 2020-03-06
Location: Land of Enchantment
 User Profile |
According to what I have read on several forums:
- If a hard caul is used and the adhesive does bleed through the veneer, the flat surface of the caul will spread any adhesive that happens to bleen through:
- If a breather mesh is used instead of the normal hard caul, any bleed through will simply bead on the veneer which, when dry, can be scraped off leaving little or no adhesive as compared to the former method.
I was given some of this mesh and more info can be read on the following webpage:
https://www.joewoodworker.com/veneering/breather-mesh.htm
I hope this helps.
|
