Shaun
Posts: 1
Joined: 2019-08-14
 User Profile |
I have been messing around with my Fliptop Table press for awhile now and have had no luck in stopping the air leaks. My blue vacuum cycles on every 5-10 seconds. I put my ear all around the table and have only noticed a few whistles coming from either corner or sides. I then apply clamps to those areas, the whistle then stops but air is still escaping at the same rate.
I have replaced the black rubber gasket, tested the vacuum by itself and had no leak.
When I first had the press it worked well, I later moved shops and between that time the press stayed outside all year protected by a tarp. I had to replace the gasket because it was falling off. What else must be replaced? looking for any ideas and help. thanks
|
