Don Stephan
Posts: 825
Joined: 2003-07-18
Location: Cincinnati, Ohio
User Profile |
Bleeding through some veneers has been known to cause a slight stain of the wood. Once I had the quarter sliced walnut veneer on a king size headboard tinted yellow. My understanding is that Blocker is designed to prevent penetrating through the veneer (bleed through). I don't expect that any such staining along the edges of veneer would be noticeable.
This panel is about 30" in diameter so troweling a thin layer over the entire glue side would take a couple minutes. Yes, I am concerned about the veneer pieces beginning to expand before full pressure in the vacuum bag, but if dark adhesive doesn't come through scroll saw cuts for leaf veins and the edges of flower petals they won'd be noticeable.
Perhaps a medium rolled layer of adhesive on the backer veneer would be adequate?
Test, test, test, then pull your hair out.
|