joe mcaskill
Posts: 24
Joined: 2011-10-25
Location: charlottetown, pei, canada
User Profile |
I took the circular table top out of the bag with two ply on back and two ply mahogany crotch burst top. The table was nice and flat coming out, but in about ten minutes it has warped all around the outside edge to the center. I have clamped the top down to a flat surface hoping it will flatten as the glue finishes off gassing. The table was left in the bag for several days because i had to work on another job. Kind of strange! The table will have a skirt and cross supports for a pedistal base so some warping can be dealt with. Just funny it all warped to the center. It is like the pie shaped crotch pieces are each pulling up at the outside edge but not at the center.
|