joe mcaskill
Posts: 24
Joined: 2011-10-25
Location: charlottetown, pei, canada
 User Profile |
Hi all,
I am applying a curly maple border to a crotch mahogany round table. The border will be on the inside and outside of the perimeter leaves. I am thinking about a way to index the layup position so that when trimmed the border will all line up with each leaf. I have already fitted the substrate leaves to the round main table, now i have to position the veneer exactly so the borders will line up on each leaf. The borders will be about 1" wide inside and out. I thought of laying the leaf on the veneer, position and trace a pencil line around the leaf on the veneer. I am just wondering if the leaf may creep when the vacuum is applied. Any thoughts or better ideas?
|
