Jeff Patrick
Joined: 2004-04-15
Location: Bainbridge Island, WA
User Profile |
I have jointed many hundreds of feet of veneer using my Festool saw and track. I use the standard ATB blade, I don't run the blade nor pull the saw backwards. Just standard cutting procedure. I do push quite slowly. Sometimes for very difficult veneer I will use blue tape on the cut line and cut right through it. I usually stack all the flitches that I will be using in any given panel. If the stack gets too tall I use less in the stack. The edges produced are perfect. Every panel I've done since adopting this method has gone together flawlessly. The method is the fastest set-up of any I've tried.
|