Don Stephan
Posts: 825
Joined: 2003-07-18
Location: Cincinnati, Ohio
 User Profile |
Not sure how the hot melt glue residue would be covered by Unibond. If I were using the Collins clamps for hardwood backgammon board, I would be clamping the mitered solid wood frame and the glue blocks would be on the outside faces of the frame. Were you planning to veneer the hardwood frames after glueup? If so, just let the Collins clamps divot the frames and then fill the divots and sand flush before veneering.
If your concern is hot melt glue residue affecting finishing, I don't think the glue penetrates the wood at all. A scraper or hand plane should get off all the residue.
Don
|
