Dave Shaw
Posts: 37
Joined: 2005-11-06
Location: Arizona
User Profile |
Hi Don,
I tried double sided tape, both 3-M and ACE Hardware double sided carpet tape. Both worked fine for about 5 minutes - after that I nearly had to hit the deck. The tape gave up and the pieces of scrap MDF came flying off and shot all around the shop. Quite a surprise. Those little camps really have some energy stored in them SNAP-----Zing! Oddly enough they all gave up at about the same time. Sounded like a hugh popcorn popper.
I may try some hot melt to hold the clamp pads down but I'm concerned that the residual glue will interfere with the Uni-bond. Has this been a problem for you and how do you get all of the hot melt off?
Thanks,
Dave
|